Travelling in all directions with electronically controlled all-wheel steering
 
Onboard computer to display and operate main functions
 
MULTI-PILOT control lever
 
3-phase AC technology for travelling, lifting and steering
 
Energy reclamation during braking and lowering (patented regenerative lowering)
 
Hydraulic fork adjustment for different load widths (optional)

Multi-directional reach trucks are utilised wherever long loads are transported in narrow aisles and need to be lifted to high lift heights. Due to electric all-wheel steering, loads up to 8m in length can be transported and stored, maximising space in the warehouse.

Seven travel programs are available for this purpose: from improved normal operation and turning on the spot to sideways
and parallel travel. In the travel mode “improved normal operation”, the already small turning radius is further reduced by
up to 34 % through simultaneous load wheel steering. The ETV Q is thus superior to any conventional 4-way stacker.

Steering change-over from 180° to 360° provides the choice between minimum turning radius and fast travel direction change.

The onboard computer combines a number of functions in one operating display. Multi-occupied function keys and a colour
display allow the operator full control and access options to travel modes or performance parameters.

As well as excellent productivity is outstanding cost effectiveness:
Increased travel and lift performance for more pallet throughput.
Long operating times through energy reclamation during braking and lowering the load (patented).
Smaller aisle width requirement due to tried and tested reach mast principle.
Significantly reduced mast vibrations due to patented mast forward reach cushioning system.

An extensive options catalogue and many battery variants from 420 to 930 Ah ensure the trucks suitability for any application.